Productos
CM572-DP B2 ABB Profibus communication module
Product Type: CM572-DP
Product ID:1SAP170200R0001
Brand: ABB
Minimum Order Quantity:1 piece
Product Net Weight/Gross Weight:0.12kg/0.2Kg
Description:CM572-DP:AC500,Communication Module PROFIBUS-DP Master,D-Sub 9 poles Profibus DPV0/V1 Protocol
New Original KEYENCE AP-C33K Ultra-compact Digital Pressure Sensor
| Model | AP-C33K | |||
| Type | Positive pressure, NPN | |||
| Rated pressure | 0 to 145.0 Psi | |||
| Fluid type | Air or non-corrosive gases | |||
| Type of pressure | Gauge pressure | |||
| Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 0.43″ (11 mm)) Display cycle: 10 times/s | |||
| Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |||
| Display resolution | Normal mode: 0.2 Psi, Focus mode: 0.02 Psi | |||
| Power consumption | Normal | 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less | ||
New Original KEYENCE AP-V41AW Wire-saving AI Digital Pressure Sensor
| Model | AP-V41AW | |||
| Type | Amplifier Unit, NPN | |||
| Applicable sensor head | AP-41M, AP-41, AP-43, AP-44 | |||
| Set and display range | -15 to +110 % of F.S. | |||
| Display | 4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18″), AI indicator (green), Display cycle: 10 times/s | |||
| Operation indicator | Red LED x 2 (corresponding to control output 1 and 2) | |||
| Repeatability | ±0.2 % of F.S. | |||
| Display resolution | AP-41M/41/44: Standard mode 0.1 inchHg, High-resolution/Focus mode 0.01 inchHg AP-43: Standard mode 0.01 kgf/cm2, High-resolution/Focus mode 0.02 Psi |
|||
New Original KEYENCE BL-1301 Laser Barcode Reader
| Model | BL-1301 | |||
| Type | Standard type | |||
| Type | Reading direction | Front | ||
| Scanning method | Raster | |||
| Laser | Light source | Visible semiconductor laser (wavelength: 660 nm) | ||
| Control output | 85 µW | |||
| Pulse duration | 112 µs | |||
| Laser class | Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10) | |||
| Reading | Supported codes | CODE39, ITF, Industrial2of5, Standard2of5, COOP2of5, CODABAR, CODE128, GS1-128, CODE93, UPC/EAN, GS1 DataBar | ||
| Number of readable digits | 74 digits (148 digits for CODE128 with start character C) | |||
| Readable bar width | 0.125 mm0.005″ | |||
| Reading distance | 65 to 500 mm 2.56″ to 19.69″ (narrow bar width 1.0 mm 0.04″) | |||
| Focal point | 120 mm 4.72″ | |||
| Largest readable label width | 339 mm 13.35″ (distance: 350 mm 13.78″, narrow bar width: 1.0 mm 0.04″) | |||
| PCS | 0.4 or more | |||
| Scanning rate | 500 to 1,300 scans/sec. (in units of 100 scans) | |||
New Original KEYENCE CA-LH16 Lenses for Machine Vision
| Model | CA-LH16 | |||
| Focal point | 16 mm 0.63″ | |||
| F-stop range (aperture) | F1.4 to F16 | |||
| Minimum WD | 0.2 m 0.7′ | |||
| Mount | C-mount | |||
| Filter size | 25.5 mm 1.00″ P0.5 | |||
| Compatible image sensor size | 2/3″ | |||
| TV distortion | -0.05 % (-0.1 %) | |||
| Resolving power | 100 cycles/mm at center, 80 cycles/mm on periphery | |||
| Ambient temperature/humidity range | 0 to +50°C 32 to 122°F, 80% RH or less (No condensation) | |||
| Weight | Approx. 81 g | |||
New Original KEYENCE CL-3000 Confocal Displacement Sensor
| Model | CL-3000 | |||
| Type | Controller | |||
| Number of optical unit connections | Controller only: 2 units; using expansion units / relay units: 6 units | |||
| Interface | EtherNet/IP™ | Supports cyclic communication and message communication; RPI: 1 to 10,000 ms (0.5 ms units) Maximum number of connections: 8, complies with Version CT14 conformance test Cannot be used when using PROFINET, PLC link or EtherCAT |
||
| PROFINET | Compatible with conformance class A. Cannot be used when using EtherNet/IP™, PLC link or EtherCAT | |||
| PLC-Link | The following PLCs are supported: Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series Cannot be used when using EtherNet/IP™, PROFINET or EtherCAT |
|||
| Ethernet | Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs 100Base-TX, capable of communication with CL-NavigatorN |
|||
| USB | Conforms to USB 2.0 HighSpeed, capable of communication with CL-NavigatorN | |||
| RS-232C | Allows for measurement data output and control I/O via no-protocol command communication with PCs and PLCs Baud rate: 9600 to 115,200 bps, data length: 8 bit, stop bit: 1 bit, parity: none / even numbers / odd numbers |
|||
| Terminal (IN) | 13 (supports function switching via software) | |||
| Terminal (OUT) | 11 (supports function switching via software) | |||
